DS-2 Chronograph Automatic

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel

Reference: C024.462.18.041.00

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #2

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #4

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #6

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #5

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #4

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #6

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #5

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #2

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #4

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #6

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #5

DS-2 Chronograph Automatic

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel

Reference: C024.462.18.041.00

EUR 2 335.-

Reserve in boutique

Find a store

The new Chronograph from Certina is inspired by a timepiece that was at the height of its time – literally! The predecessor of the DS-2 Chronograph Automatic gave proof of its sterling qualities during a spectacular expedition to Mount Everest. The new model transports this spirit of adventure into the 21st century, with a sporty-elegant vintage design and silicon technology. In this way, traditional savoir-faire is carried over stylishly to the next generation.

Technical specifications

DS Concept

DS Concept Standard

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C024.462.18.041.00

Warranty

2-year warranty

Weight net

115.00g

Case

Case material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 20 bar (200 m)

Length

40.50mm

Width

43.36mm

Height

15.25mm

Between lugs

20.00mm

Dial

Color

Blue

Material

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Movement

Type

Automatic

Model

A05.231

Features

Chronograph 30 min.

Automatic

Silicon

ETA

Swiss Made

Bracelet

Strap back

Synthetic

Strap front

Fabric

Material

Quick-release system

Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.

Synthetic

Buckle material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

DS-2 Chronograph Automatic

Materials

Stainless steel

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

Super-LumiNova®

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

Sapphire crystal

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

	
		OSZAR »